WS2812B WS2811 LED WiFi Controller, iOS Android App Control DC 5V~24V SP801E for SK6812 WS2815 Digital One-Wire RZ Code LED Driver IC RGB LED Strip LED Matrix Panel Module Light AP/STA Mode

Specifications: Working temperature : -20℃~60℃; Working Voltage : DC5V~24V; Working Current : 25mA~130mA; Flash Capacity : 128M; Output signal: 4-port TTL signals; Maximum pixel number : 1024 / port; Dimension: 80mm*41mm*20mm; LED driver IC: Normal one-wire RZ code LED driver IC . Working Modes： 1.AP(Access Point) mode:Controller and Phone connect directly, controller works as an access point. 1> Go to your phone Settings page, connect the controller(SSID like SP801E_XXX, the default password is 12345678); 2> Open the Click “+” button to configure the new SP801E controller，then the controller will be showed on the device list; 2.STA(Station) mode:Controller and phone are in one same WiFi network, in this network, users can operate the controller. There are two ways to configure the controller into the local WiFi network: 1> Connect your phone or tablet to a 2.4G Wi-Fi network.(Doesn't support 5.0G Wi-Fi network) 2> Open the App and click ”+” button to scan devices, click Add manually and select SP801E controller in the device category; 3> Input your Wi-Fi network password; 4> BluFi config and AP config: BluFi config: Press and hold device’s “STA/A” button until the green led indicator flashes,then the device enters the network configuration state, click next and selcet the device you want to add; AP config: Switching the device to the AP mode, click next and connect your phone’s WIFI to the named like SP801E_XXX hotspot, password is 12345678,and return to the APP; 5> Pressing next step to wait for the configure processing finish; 6>After the configuration finished, the LED indicator will turn into solid green, the controller will be showed on the device list. 1. Please keep your phone, the Wi-Fi router and the controller closer together to maintain a better signal connection during configuration. 2. It can only support 2.4Ghz WIFI and cannot support

• [Widely compatible] SP801E controller is compatible with a variety of Art-Net protocol-based upper computer software. Support almost all one-wire LED driver ICs, such as WS2812B, WS2811, SK6812, WS2815, etc. (Do not control 5050RGB or RGBW LED strips without ICs).
• [2 working network modes] AP mode and STA mode (LAN). AP(Access Point) mode--Controller and Phone connect directly, controller works as an access point. STA(Station) mode--Controller and phone are in one same WiFi network, in this network, users can operate the controller.
• [Customized multiple effects] Adjustable direction, width, color, length, and shape. Multiple multi-color dynamic modes, and multiple single-color modes such as overlay, flash, flow, and static.
• [Multiple functions] Built-in text, music and other multi-type layer effects, support two effect layers overlay. Support real-time preview, can record the current scene to the controller storage space, can create a scene program list.
• [SP801E controller] The controller is controlled by mobile APP, support IOS10.0 and Android 4.4 (controller does not support 5G WiFi network). Support modify device name, calibrate RGB channel order, Output signal: 4-port TTL signals; Maximum pixel number : 1024 / port.